shop background

MESH RIDER®RADIO – 5650 – 5755 MHz – DATASHEET

Mesh Rider® Radio Platform

Mesh Rider® Radio provides resilient, low latency, long-range, high-throughput links to implement industrial-grade private wireless mobile mesh Networks.

5.7 GHz Japan Robotics Band

The 5.7 GHz band is a special band in Japan for Robotic use cases. Users are permitted to transmit up to 1W of (30 dBm) of power to achieve several kilometer long links for IIoT applications like drones and ground robots.

Key Features

Low SWaP
Performance RF
Fast Integration
Long Range
Mobile Mesh
Mesh
Frequency Flexibility
С&C + Video
C&C + Video
Affordable
Mesh Rider Logo Color

Mesh Rider®

A small, high performance mesh radio designed for unmanned systems. The Embedded Smart Radio is a robust radio incorporating all the benefits of Mesh Rider in a SWaP (Size, Weight and Power) optimized form factor.

Common Integrations

Unmanned Aerial System
Drones/UAVs
UGVs
AMRs
Mobile Robotics
PERFORMANCE OVERVIEW
Protocol CompatibilityFully compatible with Wi-Fi (IEEE 802.11b,g,n)
Wearable/OEM: Max Operating Range with
Embedded Antennas (Indicative)
1.5 Km
Wearable/OEM: Max Operating Range with 6 dBi
Attached Antenna (Indicative)
10 Km
mini-OEM: Unobstructed Operating Range with 3 dBi Antennas on both ends (Indicative)>8 Km (>5 Miles)
Over the Air Data
Encryption
128-bit AES (Full throughput)
256-bit AES (12 Mbps max throughput)
Operating ModesWiFi Radio: AP, Client
Mesh Rider Radio: Mesh, WDS AP, WDS Client
Bridged or Internet Gateway with NAT
Command & Control
Channel
Ultra-Reliable Low Latency Channel (URLLC). Latency 1.5-10 ms
Video Channel Optimized video streaming with Unicast and Multicast transmission
Spectrum ScanAutomatic spectrum scan on boot up
Mesh Automatic Transmit
Power Control
Intelligently adjusts Tx output power based on signal strength. Allows
the device to be utilized in a dispersed and dynamic mesh.
RF SPECIFICATIONS
Frequency Range5650-5755 MHz
Max RF Power at SMA port
(Software control)
Each radio individually
calibrated
0.8W (29 dBm) @ MCS 0,8

0.63W (28 dBm) @ MCS 3,11

0.4W (26 dBm) @ MCS 5,13

0.25W (24 dBm) @MCS 7,15
Channel Sizes
(Software Selectable)
3, 5, 10, 20 MHz (10 MHz max permitted by Japan MIC)
Radio Data RateAuto adapting Modulation Coding Scheme (MCS0-15)
Antenna Signal Strength-30 to -90 dBm (Recommended), Absolute Maximum= +12 dBm
Wearable & OEM: Receiver LNA Gain >20 dB
mini-OEM: Receiver LNA Gain >15 dB
RF Power Control In 1 dBm steps, Tolerance ±1 dBm
Automatic Transmit Power
Control (ATPC)
Intelligently adjusts the transmit power for very close range
operation
Integrated Antenna Port
Protection
Able to withstand open port, >10 KV (contact) and >15KV
(open air discharge) as per IEC-61000-4-2
Wireless Error Correction FEC, ARQ
Frequency Accuracy±10 ppm max over life
WIFI HOTSPOT RF SPECIFICATIONS (APPLICABLE TO WEARABLE & OEM MODELS ONLY)
WiFi StandardIEEE 802.11n, 2x2 MIMO
Frequency Range2400-2482 MHz
RF Power Output (Typ)
50 mW (17 dBm) EIRP
Channel Size20 MHz
Radio Data RateAuto adapting Modulation Coding Scheme (MCS 0-15)
Antenna Signal Strength-25 to -85 dBm (Recommended), Absolute Maximum= +12 dBm
Wearable & OEM: Receiver LNA Gain >20 dB
RF Power Control In 1 dBm steps, Tolerance ±1 dBm
Wireless Error Correction FEC, ARQ
NETWORKING SPECIFICATIONS
Mesh RouterSelf-Forming/Self-Healing, Peer to Peer
Custom Software Package
Manager
Image Builder, OPKG, ipk
Radio ManagementWeb GUI (HTTPs), SSH, SNMP and JSON-RPC
Access controlPassword, MAC, IP, Port filtering
Supported Protocols IPv6, QoS, DNS, HTTPS, IP, ICMP, NTP, DHCP
Software UpgradeOver the air software upgrade supported
ADDITIONAL MESH RIDER RF SPECIFICATIONS
Radio Data Rates (Dynamic Link Auto Adaptation)MCS15 = 64QAM (5/6)
MCS14 = 64 QAM (3/4)
MCS13 = 64 QAM (2/3)
MCS12 = 16QAM (3/4)
MCS11 = 16QAM (1/2)
MCS10 = QPSK (3/4)
MCS9 = QPSK (1/2)
MCS8 = BPSK (1/2)
MCS7 = 64QAM (5/6)
MCS6 = 64 QAM (3/4)
MCS5 = 64 QAM (2/3)
MCS4 = 16QAM (3/4)
MCS3 = 16QAM (1/2)
MCS2 = QPSK (3/4)
MCS1 = QPSK (1/2)
MCS0 = BPSK (1/2)
Rx Sensitivity (3 MHz Channel BW)-100 dBm @ MCS 0
-97 dBm @ MCS 1
-95 dBm @ MCS 2
-92 dBm @ MCS 3
-87 dBm @ MCS 4
-85 dBm @ MCS 5
-82 dBm @ MCS 6
-79 dBm @ MCS 7
-97 dBm @ MCS 8
-93 dBm @ MCS 9
-91 dBm @ MCS 10
-88 dBm @ MCS 11
-84 dBm @ MCS 12
-80 dBm @ MCS 13
-79 dBm @ MCS 14
-78 dBm @ MCS 15
Rx Sensitivity (5 MHz Channel BW)-98 dBm @ MCS 0
-95 dBm @ MCS 1
-93 dBm @ MCS 2
-90 dBm @ MCS 3
-85 dBm @ MCS 4
-83 dBm @ MCS 5
-80 dBm @ MCS 6
-77 dBm @ MCS 7
-95 dBm @ MCS 8
-91 dBm @ MCS 9
-89 dBm @ MCS 10
-85 dBm @ MCS 11
-82 dBm @ MCS 12
-78 dBm @ MCS 13
-77 dBm @ MCS 14
-76 dBm @ MCS 15
Rx Sensitivity (10 MHz Channel BW)-96 dBm @ MCS 0
-93 dBm @ MCS 1
-91 dBm @ MCS 2
-88 dBm @ MCS 3
-83 dBm @ MCS 4
-81 dBm @ MCS 5
-78 dBm @ MCS 6
75 dBm @ MCS 7
-93 dBm @ MCS 8
-89 dBm @ MCS 9
-87 dBm @ MCS 10
-84 dBm @ MCS 11
-80 dBm @ MCS 12
-76 dBm @ MCS 13
-75 dBm @ MCS 14
-74 dBm @ MCS 15
Receive Adjacent Channel
Rejection (ACRR)
>34 dB @ MCS0 for 20 MHz channel (Typ)
Receive Noise Figure +4 dB
Receive Alternate Chanel
Rejection (ALCR)
-28 dBr (Fc ± ChBW)
Transmitter Spurious
Emission Suppression
-40 dBc
REGULATORY INFORMATION
Japan (MIC)Japan Radio Equipment for Unmanned Aircraft (UA) Article 2, Paragraph 1, Item 72 Category: RB (Unmanned Mobile Image Transmission System)
Regulatory RequirementsDesigned and verified to meet various regulatory requirements. Formal
testing and approval are required for the Integrator’s antenna type.
The integrator is responsible for obtaining all regulatory approvals in target markets for the finished product.
RoHS/WEEE ComplianceYes. 100% Recyclable/Biodegradable packaging
MESH RIDER RADIO PLATFORM - 5650 - 5755 MHZ
Form Factorsmini oem
Model CodeRM-5700-2LSX-SA-ST (Industrial)
DimensionsBaseband: 47 x 28 x 5 mm

RF Board: 46 x 51 x 6.5 mm
Weight25-40 grams (depending on mounting configuration)
Operating Voltage5V ± 5%
Host InterfacesEthernet (100 Base-T), USB-Dev, 1x UART (3.3V)
Antenna Connection2x MMCX-Female connectors
Temperature range
(Operating)
Industrial: -40°C to +85°C, Commercial: -10°C to +65°C
External Temp: Up to +40°C (Wearable)
System’s thermal design should ensure that the radio’s case
temperature is maintained within these specifications
Temperature range
(Non-Operating)
-40°C to +100°C
Ingress ProtectionIP 50, Dust Protected, No Liquids
Relative Humidity
5% to 95% noncondensing
Shock and Vibration
Resistance
Compliant to MIL-STD-810H for high shock and vibration
DC Power ConsumptionRX: 4.1 W
TX continuous (24 dBm): 11 W
TX continuous (27 dBm): 16 W
Reliability
Extreme Reliability, IPC Class 2 standard with Class 3 options
Integrated GPS (Optional)N/A
Integrated CPUMIPS 24K, 540 MHz, 32MB Flash, 64MB DDR2 RAM
ESD ProtectionIEC 61000-4-2 test criteria, Level 3 (±6KV) for Contact Discharge
and Level 4 (±15KV) for Air Discharge
MTBF>235k hours (25 years)
Life Cycle Planning
Extended lifespan with 7 years guaranteed availability

Save as PDF

Loading...