Mesh Rider® Radio Model
Mesh Rider® Radio provides resilient, low latency, long-range, high-throughput links to implement industrial-grade private wireless mobile mesh Networks.
2.4 GHz WiFi Band
The 2.4 GHz band is license free in most of the world. It can be used for any purpose. In the USA, Canada, Central and Latin Americas, modems are permitted to transmit up to 4W of EIRP (30 dBm radio + 6 dBi antenna) to achieve several kilometer long links for IIoT applications like drones and ground robots.
Link Distance
Mesh Rider® Radio’s Mesh Rider waveform has been field proven by customer to provide a link over 100km. The link distance of each system, however, depends on many factors: mainly antenna gain, line of sight obstructions, Fresnel zone clearance, and environmental noise conditions. The chart below give an indication of radio’s performance in a typical configuration.
RM-2450 Xtreme Link Performance
Remote Antenna = 3 dBi, Control Station Antenna = 6 dBi,
Fade Margin = 10 dBm, Fresnel Zone 60% Clearance
| PERFORMANCE OVERVIEW | |
|---|---|
| Over the Air Data Encryption | 256-bit AES software encryption (12 Mbps max throughput) (FIPS140-2, Level 2 compliant) 128-bit AES software encryption (90 Mbps max throughput) |
| Operating Modes | Mesh Rider Radio: Mesh, WDS AP, WDS Client Bridged or Internet Gateway with NAT |
| Command & Control Channel | Ultra-Reliable Low Latency Channel (URLLC). Latency 3-30 ms |
| Video Channel | Optimized video streaming with Unicast and Multicast transmission |
| RF SPECIFICATIONS | |
|---|---|
| Frequency Range | 2400-2482 MHz |
| Max RF Power at SMA port (Software control) Each radio individually calibrated | 1W (30 dBm) @ MCS 0,8 0.8W (29 dBm) @ MCS 3,11 0.4W (26 dBm) @ MCS 5,13 250mW (24 dBm) @MCS 7,15 |
| Channel Sizes (Software Selectable) | 5, 10, 20 MHz |
| Radio Data Rate | Auto adapting Modulation Coding Scheme (MCS0-15) |
| Antenna Signal Strength | -25 to -85 dBm (Recommended), Absolute Maximum= +12 dBm |
| NETWORKING SPECIFICATIONS | |
|---|---|
| Mesh Router | Self-Forming/Self-Healing, Peer to Peer |
| Custom Software Package Manager | Image Builder, OPKG, ipk |
| Radio Management | Web GUI (HTTPs), SSH, SNMP and JSON-RPC |
| Software Upgrade | Over the air software upgrade supported |
| REGULATORY INFORMATION | |
|---|---|
| FCC ID | Yes. |
| Industry Canada (IC) | Yes. |
| CE | Yes. |
| MESH RIDER RADIO PLATFORM - 2400 - 2482 MHZ | ||||||
|---|---|---|---|---|---|---|
| Form Factors |  |  |  |  |  |  |
| Model Code | RM-2450-11N3 (2.4 GHz, 1x1, Industrial) | RM-2450-12M3 (2.4 GHz, 2x2, Industrial) | RM-2450-2J-XM (Industrial) | RM-2450-2K-XO (Industrial) | RM-2450-2K-XW (Industrial) | RM-2450-2J-XE (Industrial) |
| Dimensions | RF Board: 47 x 28 x 6.5 mm Baseband Board: 47 x 28 x 5 mm | Baseband: 47 x 28 x 5 mm RF Board: 46 x 51 x 6.5 mm | 65 x 57 x 12 mm | 127 x 63 x 13 mm | 130 x 75 x 23 mm | 148 x 137 x 58 mm |
| Weight | 15-30 grams (depending on mounting configuration) | 25-40 grams (depending on mounting configuration) | 78 grams (Embedded) | 125 grams (OEM) | 245 grams (Wearable) | 540 grams (External) |
| Operating Voltage | 5V ± 5% | 5V ± 5% | 6~42V DC | 6 ~ 24V, USB-PD compliant | 6 ~ 24V, USB-PD compliant | 6~42V DC |
| Host Interfaces | Ethernet (100 Base-T), USB -Dev, 1x UART (3.3V) | Ethernet (100 Base-T), USB-Dev, 1x UART (3.3V) | 2x Ethernet (100 Base-T) and UART (3.3V FT234XD chipset) OR USB 2.0 Hub ports | USB-Dev, Ethernet (100 Base-T), 1x UART (3.3V), USB-Host, and 1x GPIO port (2.62V) | USB-Dev, Ethernet (100 Base-T), 1x UART (3.3V), USB-Host, and 1x GPIO port (2.62V) | 2x Ethernet (100 Base-T), 1x UART (3.3V FT234XD chipset), and 2x USB 2.0 Hub ports |
| Antenna Connection | 1x MMCX-Female connectors | 2x MMCX-Female connectors | 2x MMCX-Female connectors | 2x SMA-Female connectors for Attached/External antennas | 2x SMA-Female connectors for Attached/External antennas | 2x SMA-Female |
| Temperature range (Operating) | Industrial: -40°C to +85°C, Commercial: -10°C to +65°C External Temp: Up to +40°C (Wearable) System’s thermal design should ensure that the radio’s case temperature is maintained within these specifications. |
|||||
| Temperature range (Non-Operating) | -40°C to +100°C |
|||||
| Ingress Protection | IP 50, Dust Protected, No Liquids | IP51, protected against dust and rainfall | IP66, resistant to strong jets of water . |
|||
| Relative Humidity | 5% to 95% noncondensing |
|||||
| Shock and Vibration Resistance | Compliant to MIL-STD-810H for high shock and vibration |
|||||
| DC Power Consumption | ? | 6W @ Max Range 2W in Rx mode | 14W @ Max RF power in UDP data Tx mode 2W in data Rx mode 1.2W in Sleep mode | 14W @ Max Data Throughput 12W @ Max Range 3.5W in Rx mode 2W in Standby mode | 14W @ Max Data Throughput 12W @ Max Range 3.5W in Rx mode 2W in Standby mode | 14W @ Max RF power in UDP data Tx mode 2W in data Rx mode 1.2W in Sleep mode |
| Reliability | Extreme Reliability, IPC Class 2 standard with Class 3 options | |||||
| Integrated GPS (Optional) | N/A | N/A | Simultaneous multiple constellations (GPS/Galileo/Glonass/BeiDou/QZSS), 1.5 meter CEP position accuracy, -163 dBm tracking sensitivity | Simultaneous multiple constellations (GPS/SBAS/Galileo/Glonass/BeiDou/QZSS), Receive Sensitivity -167 dBm Max. Velocity 500m/sec ± 0.05m/S, Heading ± 0.3 degrees, Position Accuracy 2m | Simultaneous multiple constellations (GPS/SBAS/Galileo/Glonass/BeiDou/QZSS), Receive Sensitivity -167 dBm Max. Velocity 500m/sec ± 0.05m/S, Heading ± 0.3 degrees, Position Accuracy 2m | Simultaneous multiple constellations (GPS/Galileo/Glonass/BeiDou/QZSS), 1.5 meter CEP position accuracy, -163 dBm tracking sensitivity |
| Integrated CPU | MIPS 24K, 540 MHz, 32MB Flash, 64MB DDR2 RAM |
|||||
| ESD Protection | IEC 61000-4-2 test criteria, Level 3 (±6KV) for Contact Discharge and Level 4 (±15KV) for Air Discharge |
|||||
| MTBF | >235k hours (25 years) | |||||
| Life Cycle Planning | Extended lifespan with 7 years guaranteed availability | |||||
Loading...